Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCTSPECIFICATIONS
Chuck ...........................................................
1/2
in. Keyless
Motor ...............................................................
19.2 Volt DC
Switch .............................. VSR (Variable Speed Reversible)
No Load Speed ....................... 0-375/0-1,600
r/min. (RPM)
Clutch ..............................................................
24 Positions
Torque ...................................................................
465 in.lb.
KNOW
YOUR DRILL=DRIVER
See Figure 1, page L
The safe use of this product requires an understanding
of
the information on the tool and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
AUXILIARY
HANDLE
Your drill is equipped with an auxiliary handle for ease of
operation and to prevent loss of control.
BIT STORAGE
Bits provided with the drill-driver can be placed in the
storage area, located on the base of the tool.
DIRECTION
OF ROTATION
SELECTOR
(FORWARD/REVERSE/CENTER
LOCK}
Your drill-driver has a direction of rotation (forward/
reverse/center
lock) selector located above the switch
trigger for changing the direction of bit rotation. Setting
the direction of rotation selector in the OFF (center lock)
position will lock the switch trigger to help reduce the
possibility of accidental starting when not in use.
LED WORKLIGHT
The LED worklight illuminates when the switch trigger is
depressed. This provides extra light for increased visibility.
KEYLESS
CHUCK
The keyless chuck allows you to hand-tighten
or release
the drill bit in the chuck jaws.
LEVEL
A level is located on the rear of the motor housing to help
keep the drill bit level during use.
TORQUE
ADJUSTMENT
RING
Your drill has a 24-position
clutch. The torque adjustment
ring can be turned to select the right amount of torque for
your application.
TWO-SPEED
GEAR TRAIN
(HI=LO)
The two-speed
gear train is designed for drilling or driving
at LO (1} or HI (2) speeds. A slide switch is located on top
of your drill for selecting either LO (1) or HI (2) speed.
VARIABLE
SPEED
The variable speed switch trigger delivers higher speed
with increased trigger pressure and lower speed with
decreased trigger pressure.
UNPACKING
PACKING
LIST
This product requires assembly
[] Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
A
WARNING:
Do not use this product if any parts
on the Packing List are already assembled to your
product when you unpack it. Parts on this list are not
assembled to the product by the manufacturer and
require customer installation. Use of a product that
may have been improperly assembled could result in
serious personal injury.
[] Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
[] Do not discard the packing material until you have
carefully inspected and satisfactorily
operated the tool.
[] If any parts are damaged or missing, please call
1-800-932-3188
for assistance.
Drill-Driver
Auxiliary Handle Assembly
Double-ended
Bit (2)
Operator's Manual
_
WARNING:
If any parts are damaged or missing do
not operate this product until the parts are replaced.
Use of this product with damaged or missing parts
could result in serious personal injury.
A
WARNING:
Do not attempt to modify this tool
or create accessories not recommended
for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
6 - English
Publicidad
Tabla de contenido
