Installation Location; Moving The Unit - Steren AMP-040SD Manual De Instrucciones

INSTALLATION LOCATION

- To ensure proper operation and to avoid the potential for safety
hazards, place the unit on a firm and level surface. When placing the
unit on a shelf, be certain that the shelf and any mounting hardware can
support the amplifier's weight.
- Make certain that the proper space is provided both above and below
the unit for ventilation. If the amplifier will be installed in a cabinet or
other enclosed area, make certain that there is sufficient air movement
within the cabinet. Consult with your dealer or installer for more
information.
- Do not place the unit directly on a carpeted surface.
- Avoid installation in extremely hot or cold locations, in an area that is
exposed to direct sunlight or near heating equipment.
- Avoid moist or humid locations.
- Do not obstruct the ventilation slots on the top of the unit or place
objects directly over them. Remember, power amplifiers generate heat,
and the heat sink fins and ventilation slots that form part of the cabinet
are specially designed to remove this heat.
Placing other electronic equipment near these heat dissipation systems
may possibly affect the long-term reliability of both your amplifier and
the objects placed above it. The shipping materials used to protect
your new amplifier were specially designed to cushion it from shipping
shock and vibration. We suggest that you save the carton and packing
materials for use in shipping if you move or if the unit ever needs repair.
CLEANING
When the unit gets dirty, wipe it with a clean, soft and dry cloth. If necessary,
first wipe the surface with a soft cloth slightly dampened with mild soapy
water, followed by a fresh cloth with clean water. Wipe immediately with
a dry cloth. Never use benzene, thinner, alcohol or any other volatile
cleaning agent.
Do not use abrasive cleaners, as they may damage the finish of metal
parts. Avoid spraying insecticide near the unit.

MOVING THE UNIT

Before moving the unit, be certain to disconnect any interconnection
cords with other components, and make certain that you disconnect the
unit from the AC outlet.
4