Steren AMP-040SD Manual De Instrucciones página 24

R e a r p a n e l
1. - To connect the speakers you can
plug in different ways, for example:
• Two 8ohm speakers parallel to get
an impedance of 4 ohms. (FIG1).
• Two 8ohm speakers in serial to get
an impedance of 16 ohms. (FIG2).
• Four 8 ohm speakers in serial/
parallel to get an impedance of 8
ohms. (FIG3).
2. - When you need to connect more of four speakers you can use the
amplifier´s 70 V line output.
To use the 70 V line output, a line transformer is needed.
You can connect as many speakers as the amplifier support.
With it, you will get a better distribution of volume.
It is easy to install.
FIG1
4 ohms
FIG2
16 ohms
FIG3
8 ohms
8 ohms
8 ohms
8 ohms
8 ohms
8 ohms
8 ohms
8 ohms
8 ohms
9