EN
NL
Cover
Storage and use temperature
Storage and use humidity
The wheelchair complies to the requirements set up in:
ISO 7176-8: Requirements and test methods for static, impact and fatigue strengths.
ISO 7176-16: Resistance to ignition of upholstered parts
ISO 7176-19: Use as seats in motor vehicles
1.3
Drawing
1.4
Accessories
The following accessories are available for the Inovys II:
Wooden table (B12)
Headrest (L55)
Headrest (L58)
Personal safety belt (B58)
Horizontal wedge (B22)
Hemiplegic armrests (B66)
Contact your specialist dealer about other accessories. He will gladly advise you.
We reserve the right to introduce technical changes. Measurement tolerance ± 15 mm / 1,5 kg / °
Table 1: Technical specifications Inovys II
Page 4
Soft grey
+ 5 °C
30%
1 = Pushing handles
2 = Push bar
3 = Back
4 = Armrests
5 = Arm supports
6 = Brakes
7 = Tip cap
8 = Rear wheels (driving wheels)
9 = Frame
10 = Front wheels (steering wheels)
11 = Seat
12 = Leg supports
13 = Footrests
14 = Identification plate
Inovys II
2011-11
+ 41 °C
70%