Setting The Slave Channel; Setting The Slave Group - Metz mecablitz 52 AF-1 Manual De Instrucciones

10.2.2 Setting the slave channel

• Press the sensor button on the touch display
REMOTE RMT CH
SLAVE
1
for the channel group (e.g.
The window for selecting the channel and
Z
35 mm
OOM
group appears.
INFO 1/1
• Press the sensor buttons on the touch
display for the channel "CH".
• Press the
touch display and select the desired
channel.
• Press the selected channel on the touch
display.
REMOTE RMT CH
SLAVE
2
Z The setting will take effect immediately.
35 mm
OOM
INFO 1/1
REMOTE
SLAVE
RMT I CH1
).
Z
sensor buttons on the
REMOTE
SLAVE
Z

10.2.3 Setting the slave group

RMT CH
1 • Press the sensor button on the touch
display for the channel group (e.g
35 mm
OOM
The window for selecting the channel and
group appears.
INFO 1/1
• Press the sensor button on the touch
display for the group "GROUP".
GROUP
• Press the sensor button on the touch
RMT
display for the desired group "RMT" or
RMT2 "RMT2".
The setting will take effect immediately.
RMT CH
2 2
35 mm
OOM
INFO 1/1
RMT I CH1
).
k
165