Metz mecablitz 52 AF-1 Manual De Instrucciones página 182

Ocultar thumbs Ver también para mecablitz 52 AF-1:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 232
Automatic switching to the flash sync speed fails to occur
• The camera has a between-the-lens shutter
(as do most compact cameras),
Switching to sync speed is therefore unnecessary.
• The camera operates with high-speed synchronisation HSS
(camera settings). Switching to sync speed does not occur in the
process.
• The camera operates with shutter speeds that are slower than
the flash sync speed. Depending on the camera mode, there is
no switch to flash sync speed (see the camera's operating
instructions).
The shots are too dark
• The subject is beyond the range of the flash unit.
Note: Using bounce flash reduces the range of the flash unit.
• The subject contains very bright or highly reflective areas.
The metering system of the camera or flash unit is deceived
as a result. Set a positive manual flash exposure correction,
e.g., +1 EV.
k
The shots are too bright
• In close-up shots, overexposure (shots that are too bright) may
result if the shutter speed is faster than the flash sync speed.
The aperture (f-stop) cannot be adjusted on the flash unit
• There is an exchange of digital data between the flash unit and
camera. Adjustment of the aperture is not possible!
182

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido