Specifications - Sony VPL-S800U Manual De Instrucciones

Specifications

Specifications
Optical characteristics
Projection system 3 LCD panels, 1 lens, projection
system
LCD panel 1.3-inch TFT LCD panel,
1,557,504 pixels (519,168 pixels
× 3)
Lens Option
Light output ANSI lumen
Lamp 400 W metal halide
Electrical characteristics
Color system NTSC
PAL-M system, switched
automatically
Resolution 600 horizontal TV lines (video
input)
832 × 624 dots (RGB input)
Acceptable computer signal
fH:15 to 65 kHz
fV:38 to 120 Hz
Max. 3 W, 90 × 50 mm
Speaker
5
(3 /
8
Input/Output
CONTROL S IN/PLUG IN POWER:
Stereo minijack
5 Vp-p, plug in power, DC 5 V
maximum output 60 mA
OUT: Stereo minijack, 5 Vp-p
REMOTE RS-422A
D-sub 9-pin (female)
(For details, see "Pin assignment"
on page 50 (EN).)
TRIG Minijack, 5 Vp-p
Power on: DC 5 V output,
impedance more than 4.7 kilohms
Power off: 0 V
S VIDEO (priority to Y IN/C IN)
IN: Mini DIN 4-pin type (male)
Y (luminance): 1 Vp-p ±2 dB
sync negative, (75 ohms
terminated)
C (chrominance): Burst
0.286 Vp-p ±2 dB (NTSC),
(75 ohms terminated)
..........................................................................................................................................................................................................
48
(EN) 1) ANSI lumen is a measuring method of American National Standard IT 7.228.
1)
700 lm
/PAL/SECAM/NTSC
3.58 4.43
× 2 inches) monaural
/
VIDEO
AUDIO IN
INPUT A
REMOTE 1 IN/OUT
Burst 0.3 Vp-p ±2 dB (PAL),
(75 ohms terminated)
OUT: Loop-through mini DIN 4-
pin type (male)
Loop-through output from the S
VIDEO IN connector
Y IN: BNC-type
Y (luminance): 1 Vp-p ±2 dB
sync negative, (75 ohms
terminated)
C IN: BNC-type
C (chrominance): Burst
0.286 Vp-p ±2 dB (NTSC)
(75 ohms terminated), 0.3 Vp-p
±2 dB (PAL) (75 ohms
terminated)
IN: Composite video: BNC-type
1 Vp-p ±2 dB sync negative,
(75 ohms terminated)
OUT: Loop-through BNC-type
Loop-through output from the
VIDEO IN connector
Phono type (stereo)
500 mVrms, impedance more
than 47 kilohms
Analog RGB/component: BNC-
type
R/R-Y: 0.7 Vp-p ±2 dB positive,
(75 ohms terminated)
G: 0.7 Vp-p ±2 dB positive,
(75 ohms terminated)
G with sync/Y: 1 Vp-p ±2 dB sync
negative, (75 ohms terminated)
B/B-Y: 0.7 Vp-p ±2 dB positive,
(75 ohms terminated)
SYNC/HD:
Composite sync: 0.6-8 Vp-p high
impedance, sync positive/negative
Horizontal sync: 0.6-8 Vp-p high
impedance, sync positive/negative
VD:
Vertical sync: 0.6-8 Vp-p high
impedance, sync positive/
negative
AUDIO IN: Phono type
500 m Vrms, impedance more
than 47 kilohms
14-pin multi connector
(For details, see "Pin assignment"
on page 50 (EN).)