Whisk Attachment; Knife Attachment - Cuisinart CSB-300 Manual Del Usuario

food, page 16, for information about when to use the
blunt edge.)
A. A.
REMOVING CHOPPER/BLADE ASSEMBLY
To remove rotate assembly right or left to release from the
cup shaft.
WHISK ATTACHMENT ASSEMBLY
Align the motor power handle with the assembled whisk
attachment and push the pieces together
until you hear and feel them click together. It may
be helpful to press the release button when assembling.
Note: Whisk and gearbox are
detachable from one another.

KNIFE ATTACHMENT

1. Before first use, separate the blades and wash them in hot, soapy
water or in the dishwasher. CAUTION: BLADES ARE SHARP.
HANDLE WITH CARE. Dry
thoroughly.
2. The two
attached before inserting
into the gearbox. Lock the blades together by inserting the rivet on
one blade into the keyhole of the other blade.
3. Holding the blades with the serrated edge facing down, insert
blades into the gearbox until you hear a click. The blades may not
line up evenly when properly inserted. CAUTION: THE BLADES
ARE VERY SHARP. BE CAREFUL WHEN HANDLING THEM.
A BLADE SHEATH IS INCLUDED TO PROTECT YOU AND YOUR
KNIFE BLADE.
SHARP SIDE
blades must
B. B.
10
BLUNT SIDE UP
be