OPERATION
TURNING CORDLESS RECHARGEABLE HAND BLENDER
ON/OFF
The power handle lets you operate the blender, chopper whisk and
knife. Keep hands, hair, clothing and other utensils away from all
blades.
BLENDING AND MIXING
The blending shaft is specially designed for mixing and stirring
all kinds of foods, including salad dressings, smoothies, shakes,
powdered drink products and sauces. It is ideal for combining dry
ingredients, and can also be used to make mayonnaise, too. The
blade mixes and stirs while adding only a minimum of air to your
mixture. A gentle up-and down motion is all you need to thoroughly
blend the most flavorful, full-bodied liquid recipes. To avoid splat-
ter, be sure the protective blade guard on the blending shaft remains
submerged in the liquid while blending. Never remove it from liquid
while the motor is running.
Insert the blending attachment into the power handle. (See Assembly
for Blending Attachment, page 8.) Insert blending shaft into mixture to
be blended. Press and hold the Auto Lock/Unlock button and press
and Power On button to turn motor on. Once motor is on, you can
release the Auto Lock/Unlock button. You can also press the Power
button first, holding it down as you press the Auto Lock/Unlock but-
ton to turn motor on. Do not hold Power button down for more than
2 minutes at a time. To turn the blender motor off, release the Power
On button.
CHOPPING AND GRINDING
Put the chopping cup firmly on a flat sturdy surface like a countertop.
Be sure the blade is assembled to use the blade edge that is appro-
priate for the food to be processed.
Put food unto the chopping cup. Be sure the food is cut into small
uniform pieces and the cup is not overloaded.
Put the chopper/grinder cover on top of the chopping cup. Be sure
the cover is properly seated. Then attach power handle to the cup
cover.
NOTE: To pulse – hold the Auto Lock/Unlock button down while
pressing and releasing the Power On button. Due to the powerful
motor provided with this unit, Cuisinart recommends using one hand
to support the chopper/grinder during operation. When you have
finished processing, release Power On button to turn motor off.
WHEN THE BLADE STOPS MOVING, remove the power handle from
the chopper/grinder cover, and remove the cover from the
chopping cup.
NOTE: Do not operate the chopper/grinder attachment without food
in the chopping cup.
11