Husqvarna FS 6600 D Manual De Instrucciones página 53

TRANSMISSION BYPASS VALVE: Turn counter
5L.
clockwise to open. Turn clockwise to close. Open to
push concrete saw.
5M. HYDROSTATIC TRANSMISSION PUMP.
ALTERNATOR/WATERPUMP BELT: Self tensioning.
5N.
See John Deere for replacements.
ALTERNATOR: See John Deere for replacements.
5O.
FIGURE 6
LIFTING BALE: The saw can be lifted from this
6A.
6 H
6 G
6 F 6 E
point.
OIL LEVEL CHECK: Dipstick indicates oil level.
6B.
Also an oil fi ll location.
BELT GUARDS AND SHIELDS: Protects engine,
6C.
guards, drives, and cooling fan.
FRONT GUIDE: Use to locate the path of the
6D.
diamond blade on the cutting line.
DO NOT OPERATE ENGINE WITH SHIELDS
REMOVED!
FAN SHIELDS: Protects engine, cooling fan,
6E.
beltdrives and pulleys.
REAR GUIDE: Use to locate the path of the
6F.
diamond blade on the cutting line.
HANDLEBARS: Used to maneuver the saw. Not
6G.
to be used to lift the saw.
ENGINE OIL FILTER: The Oil fi lter element needs
6H.
to be changed when changing oil. (100 hr)
6 A
6 C
6 C
6 B
6 D
53