Resetting The Parameters - Korg C1 Manual De Usuario

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

List of functions

Button

Function

Description [default setting]

PIANO1

Pitch

427.5..440.0...452.5Hz [440.0]

In order to adapt the C1/C1 Air pitch to that of

another instrument, you can adjust the pitch in

steps of 0.5 Hz.

PIANO2

Temperament *1

Equal...Werckmeister temperament

[00: Equal]

Select from three temperaments, including the

Equal temperament, Kirnberger temperaments

and an Werckmeister temperament.

E.PIANO1

Volume balance for parts

Only 2 layer...Both...Only 1 layer [00]

Specify the volume balance for parts during

playback of a Piano Song.

E.PIANO2

Minimum remaining space

for recording

Remaining space of 100%...0%

HARPSI/

Volume balance of layer

CLAV

mode (or partner mode)

1–9 (Layer 1 min.)...9–9 (Both max.)...

9–1 (Layer 2 min.) [9–9]

Adjust the volume balance between the sounds

for layer 1 (or left side)and layer 2 (or right side).

VIBES/

Octave of layer mode (L1, L2)

GUITAR

±1 Octave [00]

Specify the sound range for layer 1 and layer 2.

ORGAN1

Pedal of layer mode

Only 1, Only 2, Both layers [o–o]

Select the layer (or right side and left side) that

the damper effect is applied to.

ORGAN2

Delete part of User Song

Part1, Part2 : After selecting a part, press Play/

Pause (

) button to perform operation.

Delete the selected part of a User Song.

STRINGS

Stereo sound optimizer *3

On, Off [on]

Turn on/off the effect that gives presence to the

sound when the headphones are used.

BASS&

Auto power off

PIANO

Disable, 30 min [on]

( )

Save parameter settings *4

Record

Press Record ( ) button to perform opera-

tion.

Save the values and settings for parameters in

the Function Mode.

Additional Functions and Descriptions

Temperament

*1:

Setting Display

Temperament types

27.5...52.5

Display Temperament

00...02

About stretched tuning

In order to produce the most natural resonance, piano

sounds use a "stretched tuning" that makes the notes of the

-12...00...12

lower range slightly flatter than equal temperament, and

the upper range slightly sharper. This is how an acoustic

piano is normally tuned by professional tuners.

*2: Octave of layer mode (L1, L2)

100...000

Setting procedure

1. Press the + or – button beside the display to select a

layer.

1–9...9–1

L1 appears for layer 1, and L2 appears for layer 2.

2. Press the Play/Pause button.

The octave setting (00) appears in the display.

3. Press the + or – button beside the display to select an

octave setting.

To restore the default setting, simultaneously press the +

-01, 00, 01

and – buttons.

To select the octave for the other layer, press the VIBES/

GUITAR button to select the layer.

If the sound is in the Single mode, – – – appears in the

o–_, _–o, o–o

display, and a setting cannot be specified.

*3: Stereo sound optimizer

This gives presence to the sound that is reproduced, as if

playing an acoustic piano, even when headphones are used.

P1, P2

When headphones are plugged into the headphone jack,

enabled effects are applied to all sounds. The effects will be

applied to the output from the LINE OUT jack.

*4: Save parameter settings

This operation will save the parameter settings in Function

oFF, on

Mode (pitch and volume balance for parts), the metronome

settings (accent sound, sound and volume) and the sound

settings (reverb, chorus and brilliance) specified when the

Record ( ) button was pressed.

The Record button lights up while the settings are being

oFF, on

saved; do not turn off the C1/C1 Air until the button goes

dark (not lit).

—