Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Types
This ice maker has been designed
for Mobile (free-standing),
Enclosed
(as under a cabinet)
or
Built-in
(sealed) installation,
indoor or outdoor. In any case, there must be adequate
air space
around the unit for proper ventilation.
(See diagrams on page 8.)
Mobile installation:
A mobile installation
will allow you to install the ice maker free-standing
in any place you desire
provided you have access to a water supply. You must follow the stated instructions
for
a. Electrical
requirements
b. Water supply
c. Leveling the ice maker
Enclosed
Installation:
An enclosed
installation
will allow you to install the ice maker under a cabinet
or inside a
kitchen
cabinet provided
the required
clearance space around the ice maker is respected.
This
installation has the same requirements
as a mobile installation.
Built-in Installation:
If this method of installation is chosen, it will still be necessary to allow adequate ventilation
space around the unit. The following additional items must be observed.
1. Place ice maker in front of installation location. Remove the legs and place the unit fiat on
the floor or on a platform depending
on your installation requirements.
2.
The water supply line must be plumbed before connecting
to the ice maker.
3.
Choose "Connecting
the drain line" or "If you don't connect the drain hose".
4.
Turn on main water supply and tap. Check for water supply connection
leaks. Tighten every
connection
(including
connections
at the water inlet).
5.
If the electrical outlet for the ice maker is behind the cabinet, plug in the ice maker.
6.
Push the ice maker into position.
7.
Seal all around the cabinet to the floor with an approved
caulking compound.
16
Publicidad
Capítulos
Tabla de contenido
