Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT
SAFEGUARDS
Before the ice maker is used, it must be properly
positioned
and installed
as
described
in this manual,
so read the manual
carefully.
Franklin
Industries
strongly recommends
that you have a professional
install your new machine.
The warranty may be affected or voided by an incorrect installation
.To reduce
the risk of fire, electrical
shock or injury when using the ice maker,
follow
basic precautions,
including the following:
•
Plug into a grounded
3-prong outlet. Do not remove grounding
prong, do not use adapter,
and do not use an extension
cord.
•
It is recommended
that a separate
circuit, serving
only your ice maker, be provided.
Use
receptacles
that cannot be turned off by a switch or pull chain.
•
Do not connect or disconnect the electric plug when your hands are wet.
•
Never unplug the icemaker
by pulling on the power cord. Always grip the plug firmly and
pull straight out from the outlet.
•
Never clean ice maker parts with flammable
fluids. Do not store or use gasoline
or other
flammable
vapors and liquids in the vicinity of this or any other appliance.
The fumes can
create a fire hazard or explosion.
•
Before proceeding
with cleaning
and maintenance
operations,
make sure the power line of
the unit is disconnected
and the water line is shut off. (EXCEPTION:
When cleaning
the
machine's
ice making and water systems - See pages 23-25)
•
Before operating,
put all panels back into place.
•
Never allow children to operate, play with or crawl inside the ice maker.
•
Do not touch the evaporator
by hand when the machine is operating.
•
Unplug the ice maker or disconnect
power before cleaning or servicing.
Failure to do so can
result in electrical shock or death.
•
Do not attempt
to repair or replace
any part of your ice maker unless
it is specifically
recommended
in this manual. All other servicing should be referred to a qualified technician.
Publicidad
Capítulos
Tabla de contenido
