•
Use two or more people
to move
and install
ice maker.
Failure
to do so can result
in back or
other
injury.
•
To ensure
proper
ventilation
for your
ice maker,
the front
of the unit
must
be completely
unobstructed.
Choose
a well-ventilated
area with temperatures
above
45°F
(7°C)
and below
110 ° F (43 °C).
•
The ice maker
should
not be located
next to ovens,
grills or other sources
of high heat.
•
The ice maker
must be installed
with all electrical
and water
connections
in accordance
with
state
and local codes.
A standard
electrical
supply
(115VAC,
60Hz,
15A), properly
grounded
in accordance
with the National
Electrical
Code and local codes
and ordinances
is required.
•
Do not kink or pinch
the power
supply
cord between
the ice maker
and cabinet.
•
The fuse (or circuit
breaker)
size should
be 15 amperes.
•
It is important
for the ice maker
to be leveled
in order
to work
properly.
You need
to make
several
adjustments
to level it.
•
All installations
must be in accordance
with local plumbing
code requirements.
•
Make
certain
that the hoses are not pinched
or kinked
or damaged
during
installation.
•
Check
for leaks after
connection.
•
Akhough
the unit has been tested
at the factory,
due to long-term
transit
and storage,
the first
batch
of cubes
must
be discarded.
•
Remove
the packing
materials
and clean the ice maker
before
using.
•
Turn on the water
supply
tap before
switching
on the ice maker.
Never
turn the water
supply
tap offwhen
the ice maker
is working.
•
Except
to take ice from the unit, keep
the door
closed
in order
to reduce
ice melting
and to
promote
proper
ice formation.
•
If the ice maker
will not be used
for a long time,
before
the next use it must
be thoroughly
cleaned.
Follow
carefully
any instructions
provided
for cleaning
or use of sanitizing
solution.
Do not leave any solution
inside
the ice maker
after cleaning.
•
DO NOT
touch the condenser
fins. The condenser
fins are sharp
and can be easily
damaged.
•
DO NOT use solvent-based
cleaning
agents
or abrasives
on the interior.
These
cleaners
may
transmit
taste to the ice cubes,
or damage
or discolor
the interior.
•
The ice machine
cleaner
contains
acids.
DO NOT
use or mix with
any other
solvent-based
cleaner
products.
Use
rubber
gloves
to protect
hand.
Carefully
read
the
material
safety
instructions
on the container
of the ice machine
cleaner.
•
Do not use this apparatus
for other
than its intended
purpose.
SAVE THESE
INSTRUCTIONS