Sending The Device To An Authorized Mectron Service Service - Mectron Piezosurgery white Manual De Uso

09.4 SENDING THE DEVICE TO AN AUTHORISED
MECTRON SERVICE CENTRE
In the event that technical assistance is
needed on the device, contact one of the
Authorized Mectron Service Centers or your
Retailer. Do not attempt to repair or modify
the device and its accessories.
Clean and sterilize all the parts that need to
be sent to an Authorized Mectron Service
Center, following the instructions provided
in the Cleaning and Sterilization Manual
supplied with the device.
Leave the sterilized parts in the packet,
process has been performed.
The cleaning and sterilization requirements
are in line with those in force concerning
the safeguarding of health and safety on the
workplace, as per Law Decree 626/94 and
DLgs 81/08 and its subsequent amendments,
both laws of the Italian State.
In the case that the customer does not
the right to charge him or her the cleaning
and sterilization expenses, or to reject the
goods received in unsuitable conditions,
returning them to the customer, at his or her
expense, for them to be correctly cleaned and
sterilized.
9 TROUBLESHOOTING
The device must be returned properly
packaged, accompanied by all the accessories
and by a sheet bearing the:
the malfunction
invoice of the device
CAUTION: Package
Pack the device in its original package to
prevent damages during transport.
Once the material has been received by the
technical personnel will provide its evaluation
to the given circumstance. The repair works
will be performed only upon their prior
acceptance by the end customer. For further
details, contact the closest Authorized
Mectron Service Center or your retailer.
Unauthorized repair works may damage
the system and make the warranty void,
and absolve Mectron of any responsibility
for direct or indirect harm to persons or
damages to things.
EN
33