Sears Kenmore 363 Manual De Uso Y Cuidado página 3

Thismanual contains manyimportant safetymessages
Alwaysreadandobeyallsafetymessages,
Thisis thesafetyalertsymbol.. It alertsyouto safetymessages t hatinformyou
of hazards thatcankillor hurtyouorothers, o r causedamage to theproduct..
Allsafetymessages w illbepreceded bythe safety alertsymbol a ndthehazard
signal w ordDANGER, WARNING, or CAUTION. Thesewordsmean:
Youwil__l be killedor seriously injured
if you don't follow instructions°
You caAnbe killed or seriously injured if you don't follow instructions
Indicates an imminently hazardous situation which, if not avoided,
may result in minor or moderate injury, or product-damage-only.
All safety messages wilf identify the hazard, tell you how to reduce the chance of injury,
and tell you what can happen if the instructions are not followed.
To reduce the risk of fire, electric shock, or injury
to persons when using your product, basic safety
precautions should be followed, including the
following:
• NEVER unplug your refrigerator by pulling on the
power cord. Always grip the plug firmly and pull it
straight out from the outlet.
• Repair or replace immediately all electric service
cords that have become frayed or otherwise
damaged. Do not use a cord that shows cracks or
abrasion damage along its length or at either the
plug or connector end.
• When moving your refrigerator away from the wall,
be careful not to roll over or damage the power cord
• DO NOT store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
appliance.
DO NOT allow children to climb, stand or hang on
the refrigerator doors or shelves in the refrigerator.
They could damage the refrigerator and seriously
injure themselves
Unplug your refrigerator before making any repairs°
NOTE: We strongly recommend that any servicing
be performed by a qualified individual.
Before replacing a burned-out light bulb, unplug
the refrigerator or turn off power at the circuit
breaker or fuse box in order to avoid contact with
a live wire filament.. (A burned-out light bulb may
break when being replaced,.) NOTE: Moving the
control to the OFF position does not remove
power to the light circuit.
For personal safety, this appliance must be properly
grounded. Have the wall outlet and the circuit
checked by a qualified electrician to make sure the
outlet is properly grounded.