Present Ation; Dear Customer; Design And Features; Ts70, Ts90 - Husqvarna TS70 Manual De Instrucciones

Dear customer!

Thank y ou for choosing a Husqvarna product!
It is our wish that you will be satisfied with your product
and that it will be your companion for a long time. A
purchase of one of our products gives you access to
professional help with repairs and services. If the retailer
who sells your machine is not one of our authorised
dealers, ask him for the address of your nearest service
workshop.
This operator's manual is a valuable document. Make
sure it is always at hand at the work place. By following its
content (using, service, maintenance etc.) the life span
and the second-hand value of the machine can be
extended. If you ever lend or sell this machine, make sure
that the borrower or buyer gets the operator ' s manual, so
they will also know how to properly maintain and use it.
More than 300 y ears of innovation
Husqv arna AB is a Swedish company based on a tradition
that dates back to 1689, when the Swedish King Charles
XI ordered the construction of a factory for production of
muskets. At that time, the foundation was already laid for
the engineering skills behind the development of some of
the world's leading products in areas such as hunting
weapons, bicycles, motorcycles, domestic appliances,
sewing machines and outdoor products.
Husqvarna is the global leader in outdoor power products
for forestry, park maintenance and lawn and garden care,
as well as cutting equipment and diamond tools for the
construction and stone industries.
Owner responsibility
It is the o wner's/employer's responsibility that the operator
has sufficient knowledge about how to use the machine
safely. Supervisors and operators must have read and
understood the Operator's Manual. They must be aware
of:
• The machine's safety instructions.
• The machine's range of applications and limitations.
• How the machine is to be used and maintained.
Local regulations could restict the use of this machine.
Find out what regulations are applicable where you work
before you start using the machine.
The man ufacturer's reservation
Subsequent to pub lishing this manual Husqvarna may
issue additional information for safe operation of this
product. It is the owner's obligation to keep up with the
safest methods of operation.
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify
the design and appearance of products without prior
notice.
For customer information and assistance, contact us at
our website: www.husqvarna.com
4 – English
PRESENT A TION
Design and f eatures
V alues such as high performance, reliability, innovative
technology, advanced technical solutions and
environmental considerations distinguish Husqvarna's
products. Safe operation of this product requires the
operator to read this manual carefully. Ask your dealer or
Husqvarna should you need more information.
Some of the unique features of your product are
described below.

TS70, TS90

• The machine has a light and mobile design that has
been optimized for the weight/capacity ratio. The
carrying handles on the frame make the machine
easy to carry and move.
• The water tank is easy to separate from the machine
for efficient filling and emptying.
• ECS (Electronic Centrifugal Switch) enables smooth
starting and starting even with low voltages.
• The machine has two different types of motor
protection such as overload protection and
overheating indicator to lengthen the service life of the
machine.
• The patented Jet stream system provides the
conveyor cart and the blade with water in a closed
system.
Slurry drops to the bottom and only surface water
reaches the pump, which is located in a separate area
in the water tank.
The conveyor cart is continually supplied with water.
Water supply to the blade and conveyor cart is
adjustable for cooling and dust reduction.
• The machine has a capacity to cut material sizes over
28"/36" (711/914 mm) with full support from the
conveyor cart.
Flexible plunge cutting and miter cutting up to 45 ° .
•
Enables cutting 20"/24" (508/610 mm) diagonally,
which gives an average length of 28"/36" (711/914
mm).
• The conveyor cart with easy-to-remove side table
supports the material along its entire cut length. The
side table is stored under the cart during transport.
• The large size blade flange Ø 3" (82mm) provides a
large and good support surface for the blade.