Blades; General; Transport And Storage - Husqvarna TS70 Manual De Instrucciones

General

WARNING! Blades can break and cause
!
serious injuries to the user. Diamond
blades become very hot when used. An
overheated blade is a result of improper
use, and may cause deformation of the
blade, resulting in damage and injuries.
• Do not use an overheated blade.
• Make sure that the correct bushing is used for the
cutting blade to be fitted on the machine. See the
instructions under the heading Assembling the cutting
blade.
• The blades should be marked with the same or a
higher speed than that stated on the machine's rating
plate. Never use a blade with a lower speed rating
than that of the machine.
• When using diamond blades make sure that it rotates
in the direction indicated by the arrow on the blade.
• Diamond blades consist of a steel core provided with
segments or a continuous rim containing industrial
diamonds.
Suitable blades
• 10" (Ø 250 x 25.4 mm) or 8" (Ø 230 x 24.5 mm) blade
rim.
Blades for different materials
WARNING! Never use a blade for any
!
other materials than that it was intended
for.
Cutting plastics with a diamond blade
can cause kickback when the material
melts due to the heat produced when
cutting and sticks to the blade. Never cut
plastic materials with a diamond blade!
• 8" and 6" profile blade
• Blade selection should be made according to the
material being cut. Ask your dealer for help in
choosing the right product.
8 – English

BLADES

Blade vibrations
• The blade can become out of round and vibrate if a
too high feed pressure is used.
• A lower feed pressure can stop the vibration.
Otherwise replace the blade.
Sharpening diamond blades
• Always use a sharp diamond blade.
• Diamond blades can become dull when the wrong
feeding pressure is used or when cutting certain
materials such as heavily reinforced concrete.
Working with a dull diamond blade causes
overheating, which can result in the diamond
segments coming loose.
• Sharpen the blade by cutting in a soft material such as
sandstone or brick.

Transport and storage

• Remove the blade before transportation or storage of
the machine.
• Store the blade in a dry place.
• Inspect new blades for transport or storage damage.