Inserting Batteries Into The Remote - Sony DAR-RH7000 Manual De Instrucciones

Inserting batteries into the remote

You can control the recorder and the speaker
system using the supplied remote. Insert two Size
R6 (AA) batteries by matching the 3 and # ends
on the batteries to the markings inside the
compartment. When using the remote, point the
remote at (remote sensor) on the recorder.
Notes
• To operate a non Sony TV, set the code number of the
TV's manufacturer (page 88).
• Use the batteries correctly to avoid possible leakage
and corrosion. Do not touch the liquid with bare hands
should leakage occur. Observe the following:
– Do not use a new battery with an old battery, or
batteries of different manufacturers.
– Do not attempt to recharge the batteries.
– If you do not intend to use the remote for an extended
period of time, remove the batteries.
– If battery leakage occurs, wipe out any liquid inside
the battery compartment, and insert new batteries.
• Do not expose the remote sensors (marked
recorder) to strong light, such as direct sunlight or
lighting apparatus. The system may not respond to the
remote.
on the
13