Sony DAR-RH7000 Manual De Instrucciones página 89

4
Release [/1.
When the TV/DVD switch is set to TV, the
remote performs the following:
Button
[/1
2 (volume) +/–
t TV/DVD
PROG +/–
Number buttons
and SET, -/--*
(wide mode)
* For two-digit numbers, if you use the number
buttons to select the TV's programme position,
press -/-- followed by the number buttons.
To operate the t TV/DVD button
(for SCART connections only)
The t TV/DVD button switches between the
recorder and the last input source selected on the
TV. Point your remote at the recorder when using
this button. The button works even if the TV/DVD
switch is set to DVD.
When you connect the recorder to the TV via the
SCART jacks, the input source for the TV is set to
the recorder automatically when you start
playback. To watch another source, press the
t TV/DVD button to switch the TV's input
source.
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the one
that works with your TV.
Manufacturer
Sony
Grundig
Hitachi
Panasonic
Philips
Samsung
Sanyo
Operation
Turns your TV on or off
Adjusts the volume of
your TV
Switches your TV's
input source
Selects the programme
position on a Sony TV
Selects the programme
position on a Sony TV
Switch to or from the
wide mode of a Sony
wide-screen TV.
Code number
01 (default)
04
06
05, 12
02, 03
13
07
Manufacturer
Sharp
Thomson
Toshiba
JVC
Code number
08
11
10
09
89