Power Off; Cleaning Mode Selection - ECOVACS DEEBOT R95 Manual De Instrucciones

Power OFF

8
Open the robot's Top Cover. Move the Power
Switch to the "O" position to power OFF.
When DEEBOT is not working, it is suggested
*
to keep it powered ON and charging.
DEEBOT loses its map once it is powered
*
OFF. It is suggested to keep DEEBOT
powered ON if it remains in the same
home environment.

3.3 Cleaning Mode Selection

DEEBOT has several Cleaning Modes to choose from to effectively clean different floors. Cleaning
Modes are selected using the ECOVACS App or using the AUTO Mode Button on the robot's Control
Panel. For more information on the ECOVACS App, see the separate ECOVACS App leaflet.
1
AUTO Cleaning Mode
This is the most commonly used mode. In AUTO Cleaning Mode, DEEBOT cleans in a back and
forth straight-line pattern.
When DEEBOT finishes mapping, it immediately starts AUTO Cleaning Mode.
To start AUTO Cleaning Mode, press the AUTO Mode Button on the robot or
3. Operating and Programming
on the App.
13
EN