Designated Use; Classification Of The Warnings - Abicor Binzel MB EVO PRO Serie Instructivo De Servicio

MB EVO PRO/MB EVO
1 Identification
The MIG/MAG manual welding torch is used to safely weld low and high-alloy materials. It
consists of the torch neck with equipment parts and wear parts, handle and cable assembly with
central connector. The MIG/MAG manual welding torch complies with
EN 60 974-7 and is not considered to be a device having its own functions.
Arc welding can only be carried out in connection with a welding power source.
These operating instructions only describe the MB EVO PRO/MB EVO
MIG/MAG manual welding torch. The MIG/MAG manual welding torch must only be
operated using original ABICOR BINZEL spare parts.
The figures below show the MB EVO PRO 501 D version of the welding torch.
1.1 Marking
This product fulfills the requirements that apply to the market to which it has been introduced. A
corresponding marking has been affixed to the product,
if required
2 Safety
The enclosed safety instructions must be observed.

2.1 Designated use

• The device described in these instructions may be used only for the purpose and in the
manner described in these instructions. In doing so, observe the operating, maintenance
and servicing conditions.
• Any other use is considered improper.
• Unauthorised modifications or changes to enhance the performance are not permitted.

2.2 Classification of the warnings

The warnings used in the operating instructions are divided into four different levels and shown
prior to potentially dangerous work steps. Arranged in descending order of importance, they
have the following meanings:
DANGER
Describes an imminent threatening danger. If not avoided, this will result in fatal or extremely
critical injuries.
Coolant supplyCoolant supply
WARNING
Describes a potentially dangerous situation. If not avoided, this may result in serious injuries.
BAL.0414.0 • 2018-08-01
1 Identification
EN - 3