Cleaning The Cable Assembly - Abicor Binzel MB EVO PRO Serie Instructivo De Servicio

MB EVO PRO/MB EVO

8.2 Cleaning the cable assembly

WARNING
Risk of injury
Serious injuries can be caused by parts swirling around.
• When cleaning the wire guide with compressed air, wear suitable protective clothing, in
particular safety goggles.
NOTICE
• Replace any damaged, deformed or worn parts.
Carry out each step in accordance with the figures below:
Fig. 14 Equipping the torch neck
1 Disconnect the cable assembly and lay it out straight.
2 Clean the wire conduit from both sides with compressed air.
3 Mount all parts in the reverse sequence.
9 Disposal
NOTICE
• Do not dispose of the device with household waste.
• For disposal, observe the local regulations, laws, provisions, standards and guidelines.
BAL.0414.0 • 2018-08-01
A
D
E
B
9 Disposal
C
EN - 15