How To Set Up Machine Using The Program Display Panel - Janome 1100D Professional Manual De Instrucciones

F
G
J
How To Set Up Machine Using the Program
Display Panel
Turn the program selection dial and select the desired
program number.
NOTE:
Refer to the program display panel for setting up the
machine. Set the items D through J (see below) before
threading.
It is very important to refer to the threading chart for
proper threading of the stitch. Incorrect threading or
thread order may lead to skipped stitches and/or thread
breakage.
To remove the thread chain, cut threads at looper and
needle eyes and hand pull threads to the rear.
Do not sew out threads to remove the thread chain.
1 2 3 4
C
1
1.0 2.5
NO. DF SL
D
I
H
Program display
A.
Program selection dial
B.
Program number
C.
Differential feed ratio
D.
Stitch length in mm
E.
Needle position
F.
Cutting width dial position
G.
Position of upper knife
H.
2-thread converter - up/down
I.
Position of needle plate setting knob
J.
18
A
1
5 6 7 8 9 10 SAFETY 4-THREAD
2 3-THREAD WIDE
3 FLATLOCK 3
4
BLANKET 3
5
OVERCAST 2
6 FLATLOCK 2
N 7 NARROW HEM 3
8
ROLLED HEM 3
9
L R ROLLED HEM 2
10 STRETCH
WRAPPED 3
E
B