Accessories - Technics SL-1000R Instrucciones De Funcionamiento

Sistema de accionamiento directo del plato giratorio
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 78
9時51分
IMPORTANT SAFETY INSTRUCTIONS
INSTRUCTIONS
For the U.S.A. and Canada
The following mark and symbols are located on
bottom of the unit.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION :
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within
the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Conforms to UL STD 60065.
Conforms to UL STD 62368-1.
Certified to CAN/CSA STD C22.2 No.60065.
Certified to CAN/CSA STD C22.2 No.62368-1.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
≥ Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, follow the attached
installation instructions and use only shielded interface cables when
connecting to peripheral devices.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ 07102-5490
Support Contact: http://www.panasonic.com/contactinfo
THE FOLLOWING APPLIES ONLY IN CANADA
CAN ICES-3(B)/NMB-3(B)
Information on Disposal in other Countries outside
the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local
authorities or dealer and ask for the correct method of disposal.
08
(08)
English
(continued)
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
z Reorient or relocate the receiving antenna.
z Increase the separation between the equipment and
receiver.
z Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
z Consult the dealer or an experienced radio/TV
technician for help.
FCC Caution:
To assure continued compliance, follow the attached
installation instructions and use only shielded interface
cables when connecting to peripheral devices.
Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's
authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Responsible Party:
Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ 07102-5490
Support Contact: http://shop.panasonic.com/support
THE FOLLOWING APPLIES ONLY IN CANADA.
CAN ICES-3(B)/NMB-3(B)
Information on Disposal in other
Countries outside the European Union
This symbol is only valid in the European
Union.
If you wish to discard this product, please
contact your local authorities or dealer and
ask for the correct method of disposal.

Accessories

In order to prevent damage during shipping some of the equipment has been disassembled.
Please check and identify the supplied accessories.
AC mains lead (1 pc.)
AC mains lead (1 pc.)
(K2CG3YY00191)
(K2CM3YY00041)
AC mains lead (1 pc.)
Turntable mat (1 pc.)
(K2CT3YY00081)
(RGS0008)
Overhang gauge (1 pc.)
EP record adaptor (1 pc.)
(RMR2210-W)
(TEKX077)
Balance weight (1 pc.)
Dust cover (1 pc.)
(TYL0189)
(TXP0046)
Hex wrench (1 pc.)
Detachable handle (2 pc.)
(TTK0004)
(TXQ0020)
z The model numbers of the accessories are as of February 2018.
They are subject to change without notice.
z Keep the packaging materials after taking out the goods.
You will need them when carrying the product for a long distance.
z Follow the local regulations when disposing of the product.
z Do not use any other AC mains lead except the supplied one.
z Keep the auxiliary weight, screws and washers out of reach of children to prevent swallowing.
AC mains lead (1 pc.)
(K2CS3YY00033)
Auxiliary weight (1 set)
small (TPAKK61)
mid (TPAKK62)
big (TKKH51561)
Screw set for turntable (1 set)
(TYL0194)
z Screws-long
(3 pc.)
z Washers
(3 pc.)
z Belleville springs
(3 pc.)
Turntable (1 pc.)
(TYL0195)
Insulator attachment (4 pc.)
(TEKL021)
09
(09)
English

Publicidad

Tabla de contenido
loading

Tabla de contenido