Before Use; Safety Precautions; Important Safety Instructions - Technics SP-10R Instrucciones De Funcionamiento

Safety precautions

Warning
Unit
z To reduce the risk of fire, electric shock or product
damage,
- Do not expose this unit to rain, moisture, dripping or
splashing.
- Do not place objects filled with liquids, such as vases,
on this unit.
- Use only the recommended accessories.
- Do not remove covers.
- Do not repair this unit by yourself.
Refer servicing to qualified service personnel.
- Do not let metal objects fall inside this unit.
- Do not place heavy items on this unit.
AC mains lead
z To reduce the risk of fire, electric shock or product
damage,
- Ensure that the power supply voltage corresponds to
the voltage printed on this unit.
- Insert the mains plug fully into the socket outlet.
- Do not pull, bend, or place heavy items on the lead.
- Do not handle the plug with wet hands.
- Hold onto the mains plug body when disconnecting the
plug.
- Do not use a damaged mains plug or socket outlet.
z The mains plug is the disconnecting device.
Install this unit so that the mains plug can be unplugged
from the socket outlet immediately.
z Ensure the earth pin on the mains plug is securely
connected to prevent electrical shock.
- An apparatus with CLASS I construction shall be
connected to a mains socket outlet with a protective
earth connection.
Caution
Unit
z Do not place sources of naked flames, such as lighted
candles, on this unit.
z This unit may receive radio interference caused by mobile
telephones during use.
If such interference occurs, please increase separation
between this unit and the mobile telephone.
z This unit is intended for use in moderate and tropical
climates.
z Do not put any objects on this unit.
This unit becomes hot while it is on.
z Be careful not to catch your hands and/or fingers in the
turntable unit when assemble the player.
z Always use two people or more to install or move the
unit.
Placement
z Place this unit on an even surface.
z To reduce the risk of fire, electric shock or product
damage,
- Do not install or place this unit in a bookcase, built-in
cabinet or in another confined space.
Ensure this unit is well ventilated.
- Do not obstruct this unit's ventilation openings with
newspapers, tablecloths, curtains, and similar items.
- Do not expose this unit to direct sunlight, high
temperatures, high humidity, and excessive vibration.
z Ensure that the placement location is sturdy enough to
accommodate the weight of this unit ( 25).
z Do not lift or carry this unit by holding the knobs.
Doing so may cause this unit to fall, resulting in personal
injury or malfunction of this unit.
06
(06)
English
Caution for AC Mains Lead
(For the AC mains plug of three pins)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains
plug for your safety and convenience.
A 10-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the
replacement fuse has a rating of 10-ampere and that it is
approved by ASTA or BSI to BS1362.
Check for the ASTA mark or the BSI mark on the body
of the fuse. If the plug contains a removable fuse cover you
must ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a
replacement cover is obtained.
A replacement fuse cover can be purchased from your local
dealer.

Before use

Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC
mains plug (figures A and B).
Confirm the AC mains plug fitted and follow the
instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
Figure A Figure B
Fuse cover
2. Replace the fuse and close or attach the fuse cover.
Figure A Figure B
Fuse Fuse
(10 ampere) (10 ampere)
Disposal of Old Equipment
Only for European Union and
countries with recycling systems
These symbols on the products, packaging, and/or
accompanying documents mean that used electrical
and electronic products must not be mixed with
general household waste.
For proper treatment, recovery and recycling of old
products, please take them to applicable collection
points in accordance with your national legislation.
By disposing of them correctly, you will help to save
valuable resources and prevent any potential negative
effects on human health and the environment.
For more information about collection and recycling,
please contact your local municipality.
Penalties may be applicable for incorrect disposal of
this waste, in accordance with national legislation.

IMPORTANT SAFETY INSTRUCTIONS

For the U.S.A. and Canada
Read these operating instructions carefully before using
the unit. Follow the safety instructions on the unit and
the applicable safety instructions listed below.
Keep these operating instructions handy for future
reference.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete
outlet.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid injury
from tip-over.
13 Unplug this apparatus during lightning storms or when
unused for long periods of time.
14 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
Warning
Unit
z To reduce the risk of fire, electric shock or product
damage,
- Do not expose this unit to rain, moisture, dripping or
splashing.
- Do not place objects filled with liquids, such as vases,
on this unit.
- Use only the recommended accessories.
- Do not remove covers.
- Do not repair this unit by yourself.
Refer servicing to qualified service personnel.
AC power supply cord
z The power plug is the disconnecting device.
Install this unit so that the power plug can be
unplugged from the socket outlet immediately.
z Ensure the earth pin on the power plug is securely
connected to prevent electrical shock.
- An apparatus with CLASS I construction shall be
connected to a power socket outlet with a protective
earthing connection.
Caution
Unit
z Do not place sources of naked flames, such as lighted
candles, on this unit.
z Be careful not to catch your hands and/or fingers in the
turntable unit when assemble the player.
z Always use two people or more to install or move the
unit.
Placement
z To reduce the risk of fire, electric shock or product
damage,
- Do not install or place this unit in a bookcase, built-in
cabinet or in another confined space.
Ensure this unit is well ventilated.
- Do not obstruct this unit's ventilation openings with
newspapers, tablecloths, curtains, and similar items.
(07)
English
07