6
Lower suction bar
8
Ready for use
Battery capacity: when the display
is blinking, load immediately.
Amount of water
Brush active/inactive
1. Water active/inactive
2. Function active: Keep pressed for over 2 seconds and type =
Amount of water +1
3. No functions active: Keep pressed for over 2 seconds
Dosing system active/inactive
5.2
During operation
•
When machine is stopped, the brush set must be switched off immediately
by releasing the operating lever to prevent any damage to floor coverings.
•
Only install original brushes, pads or other accessories.
Machine in motion and moving parts
•
The drive motion and being near rotating brushes/pads pose a risk of injury.
•
If you are handling the machine near cables, motors or parts that have been moved, the machine must be turned off.
•
Do not allow machine to come into contact with items of clothing, jewellery or hair.
•
Ensure that no cables, ropes or similar are picked up and reeled in by the running brush unit.
•
Turn off the machine before changing the brushes.
7
Turn on the service handle and
start all the functions chosen.
Dosing system active/inactive (optional)
Suction active/inactive
Machine on/off
35
EN