After operation
1
Turn off all the functions
(Switch off button).
must be OFF.
2.1
hose for the fresh water tank
remove from bracket
2.3
hose for the dirty water tank
remove from bracket
2.5
Tilt the dirty water tank to
clean out the remaining water
One tank of water/chemicals is sufficient with average water dosing for about 30-45 minutes.
Notice:
Empty dirty water tank before refilling fresh water tank!
A fully charged battery is good for up to 2 hours
(depending on the floor covering, brushes, pads and water setting).
Notice:
The battery must be charged if the battery light starts blinking.
Overload protection: If the brush motor is blocked during operation, the machine is switched off
automatically! By turning the machine off and then on again, you can continue your work.
- Button
2
Fresh and dirty water tanks
clean out
2.2
Empty the fresh water tank.
2.4
Empty dirty water tank
36