Direct Selection - Rotel RDV-1050 Manual De Instrucciones

NOTES:
The RDV-1050 does not support "packet
writing (UDF format)" discs.
The RDV-1050 does not support the ID3
tag and WMA tag.
The RDV-1050 supports discs recorded
with multiple sessions.
Some discs may not play due to disc
characteristics or recording conditions.
Programmed and random playback func-
tions do not work with MP3/WMA discs.
For MP3, the RDV-1050 only can play
back tracks with the following file exten-
sions; ".MP3," ".Mp3," ".mp3" and
".mP3."
For WMA, the RDV-1050 only can play
back tracks with the following file exten-
sions; ".WMA," ".wma," and any other
combination of upper case and lower case
letters (such as ".Wma").
Time required for reading the disc con-
tents may vary for different discs, depend-
ing on the number of groups (folders) and
tracks (files) recorded, etc.
You cannot advance or reverse playback
by pressing g or -
] [
s 9
ing down or
} {
WMA disc playback.
The RDV-1050 supports WMA files re-
corded with a bit rate of 48 kbps or higher.
The RDV-1050 cannot play back WMA
files recorded with a bit rate under 48
kbps.
Selecting a Group and Track
When inserting an MP3/WMA disc, after the
disc contents are read, the MP3/WMA CON-
TROL display automatically appears on the TV
screen. You can select a group/track from the
display using the following procedure.
1 Make sure that the black (cursor) bar is in the
left (group) column. If it is in the right column,
press to move it to the left column.
25
2 Press
desired group. On the right column, tracks
in the selected group are shown.
3 Press
track, then press ENTER
f
.
or
Press the numeric buttons
specify a desired track number.
Examples:
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
The RDV-1050 starts playback from the se-
lected track.
You can also select a desired track by press-
k
ing
(track) column then using
NOTES: If an MP3/WMA file name in-
cludes any 2-byte character, the RDV-1050
cannot show the file name correctly.
Only MP3/WMA files are shown on the
MP3/WMA CONTROL display.
, or by hold-
The order of groups/tracks shown in the
during MP3/
MP3/WMA CONTROL display may differ
from the order shown on your personal
computer when you access the disc on your
computer.

Direct Selection

You can select a desired group directly by speci-
fying the group number.
1 During playback or while stopped, press
TITLE/GROUP
group display area of the display window.
2 Press the numeric buttons to specify a de-
sired group number.
Examples:
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
Specify the group number within several sec-
onds after pressing TITLE/GROUP (i.e. while
the display window shows [—]). The RDV-1050
starts playback from track 1 of the selected
group.
3 Press the numeric buttons to specify a track
number. The RDV-1050 starts playback from
the specified track.
jw
/ to move the bar to a
s 9
or to select a desired
} {
;
or (SELECT)
/
4
to directly
to move the black bar to the right
/ jw
8
. [—] is shown in the
Repeat Playback
During playback or while stopped, press RE-
3
PEAT . Each time you press REPEAT, the
repeat mode changes as follows.
On Screen Display
.
If you press REPEAT while stopped, you need
;
to press ENTER
repeat play.
To stop repeat playback press
Note that the repeat mode remains active.
To Quit Repeat Playback
During playback, press REPEAT
repeat icon is shown on the display window.
While stopped, press REPEAT until repeat mode
indication on the MP3/WMA CONTROL dis-
play goes off.
Checking the Sampling Frequency
and Quantization Bit Length
You can check the sampling frequency and
quantization bit length of digital audio dur-
ing playback using the AUDIO - fs/Rate but-
]
ton .
English
f
or (PLAY) to start
0
(STOP) .
.
3
until no