Rotel RDV-1050 Manual De Instrucciones página 7

Composite Input TV Connection
Connect the COMPOSITE VIDEO
to the composite video input of your TV. Con-
q
nect the ANALOG AUDIO
audio inputs of your TV. A cable for these con-
nections is supplied.
If your TV has a single monaural audio input
instead of a pair of stereo inputs, you need to
use a "Y" cable adapter to connect the two output
channels of the RDV-1050 to the single input.
You can improve the sound quality of the system
by connecting the audio outputs to a separate
hi-fi audio system. (See the following section.)
S-Video Input TV Connection
If your TV has an S-video input, you should
connect it to the S-VIDEO
RDV-1050 using an S-video cable. This will
produce better picture quality.
Component Input TV Connection
If your TV has component video signal input
jacks you will get better video performance
by using the COMPONENT VIDEO
put jacks of the RDV-1050. The required cable
is not provided. Be sure to connect the "Y" out-
put to the "Y" input, "P " output to the "P
B
input, and the "P " output to the "P
R
NOTES: The component signal inputs on
some TV's have BNC type connectors. (BNC
connectors are coaxial connectors that have
keyed locking collars.) In such instances
adapters or a special cable may be needed.
A Progressive Scanning signal can be
produced with both PAL (576p) and NTSC
(480p) outputs depending on the setting of
the Video Output Selector switches.
European Version Note: When Pro-
gressive Scanning is used with a PAL output
signal, set the Video Signal Selector Switch
[ to REMOTE.
Using the SCART Connector
If you have the European version of the
RDV-1050 and your TV has a SCART connec-
tor you can use a SCART cable for stereo audio
and video connections. See the following sec-
tion for information on setting the Video Sig-
nal Selector Switches.
NOTE: The SCART connector cannot out-
put a progressive scan signal.
7
r
output
RDV-1050
outputs to the
CENTER
SUB
WOOFER
t
output of
RDV-1050
White White White
CENTER
SUB
WOOFER
Red Red Red
y out-
"
B
" input.
R
Audio Cable
RDV-1050
NOTE: See the Video Signal Selector Switches section for information on
setting the switch for the various types of connections.
AUDIO OUT
DIGITAL OUT
VIDEO
LEFT COAXIAL
PCM/STREAM
RIGHT
OPTICAL
REAR FRONT S-VIDEO
Red
Yellow
White
Audio/video cable
AUDIO OUT
DIGITAL OUT
VIDEO
LEFT COAXIAL
PCM/STREAM
RIGHT
OPTICAL
REAR FRONT S-VIDEO
S-video cable
(Europäische Version)
IN
VIDEO SIGNAL
SELECTOR
AUDIO/VIDEO OUT
REMOTE
RGB/COMP NTSC
Y/C PAL
Composite and S-Video Connection
VIDEO OUT
COMPONENT
Y P P
B R
S-video cable
Yellow
Red
White
Component Connection
VIDEO OUT
COMPONENT
Y P P
B R
G B R
Component video cable
Green
TV
IN
S-VIDEO
VIDEO
Red
RIGHT
AUDIO
LEFT
White
SCART Cable Connection
TV
SCART-Kabel
English
TV
IN
S-VIDEO
VIDEO
RIGHT
AUDIO
LEFT
Blue
Red
Y P P
B R
IN
S-VIDEO