Tabla De Contenido; Introduction - Novoferm NovoDock L150 Instrucciones De Montaje

Contents
1. Introduction .........................................1
2. Installing the drawbridge leveller .......2
3. Attachment points for lifting
equipment ............................................3
4. Preparing the place of installation ......4
5. Installing the fixed drawbridge
leveller, type W .....................................5
6. Laterally sliding drawbridge
leveller, type C .....................................7
7. Welding the guide profile in place
for the drawbridge leveller, type C ......8
8. Installing the laterally sliding
drawbridge leveller, type C ................10
9. Laterally slidingdrawbridge
leveller, type Z ....................................11
10. Welding the guide profile in place
for the drawbridge leveller, type Z ....12
11. Installing the laterally sliding
drawbridge leveller, type Z ..............14
12. Adjusting the resting position for
the drawbridge leveller ....................15
13. Adjusting the downward pressure ....16
Notes .......................................... 17/90
Copyright ...........................................92

1. Introduction

Dear customer,
Thank you for choosing a Novoferm product.
We hope that you are satisfied and that the
product meets all of your expectations.
Proper operation and maintenance
significantly increase the performance and
lifespan of the leveller. Operator errors
and poor maintenance will inevitably result
in malfunctions. In addition, reliable and
safe operation can only be guaranteed if
the unit is operated properly and
conscientiously maintained.
This installation manual must be given to the customer and kept safely during the entire period of use!
Note the following:
Depending on the choice of accessories,
the scope of supply may include
additional installation manuals. Please
read these manuals carefully and
completely. Please observe the
instructions and comply with all safety
notices and warnings.
++ WARNING +++ WARNING +++ WARNING ++
EN
1