Altimeter Mode - Topcom 2000 Manual De Usuario

12

ALTIMETER MODE

12.1 DISPLAY
The Watch includes two Altimeter functional displays:
1. Temperature
ALTI
The current (history) altitude is displayed on the middle row.
The current (history) time is displayed on the bottom row
If you want to have an accurate reading of air temperature, you must
remove the watch from the wrist that allows no body temperature
effect on your watch.
12.2 ALTUDE AND TEMPERATURE UNIT
The Watch can display altitude in meter (m) or feet (ft) and can display the
temperature in degree Celsius (C) or degree Fahrenheit (F).
• To switch among different unit, hold down the [S/S] button to change
the units following the adjacent units select sequence.
12.3 ALTITUDE HISTORY
The Watch records the altitude reading automatically every hour at the
hour, i.e 1:00, 2:00, 3:00 and etc. These records will be plotted into a
altitude record graph. In History Display, the altitude record graph shows on
the top row of the display. To review the altitude records of the last 23
hours, press the [L/R] button to move cursor left cyclically, then the
respective altitude record and its recording time (flashing) will appear on the
display.
A LT I
TOPCOM Outdoor Sportswatch 2000
2. Altitude History
A LT I
11