Battery Installation - Topcom 2000 Manual De Usuario

TOPCOM Outdoor Sportswatch 2000
15.12 MAGNETIC DECLINATION CALIBRATION
• Check chapter 14.8 "Magnetic Declination at Major Cities" to get the
magnetic declination of the city which is close to your current position.
That angle will be inputted into the Watch during the calibration.
• To select Magnetic Declination Display, press the [M] button in
Rotation Calibration Display.
• When the current magnetic declination is appeared, press the [S/S] or
[L/R] button to increase / decrease the number. (Hold down the button
changes the number at a higher speed).
• If the setting is completed, hold the [M] button to confirm setting and
exit the adjustment display.
16 LOW BATTERY DETECTION
• When the battery-low indicator appears on the
display, it means that the capacity of the battery is
low. It is recommended to replace the battery with
a new CR2032.
• However, if the appearance of battery-low indicator
is caused by using the Watch under very cold
condition, the indicator will be disappeared when
normal temperature returns.
17

BATTERY INSTALLATION

If you are not confident with electronics, let change the
battery by a professional. Do not open the watch
yourself.
Remove the back cover of the watch with a small
screwdriver. Install the 3V(CR2032) battery with the
positive (+) pole facing up and replace the cover.
Remove the battery and reinsert it if the display shows
irregular figures.
Do not short-circuit batteries & dispose of in fire.
28
3V - Lithium
CR2032