Chronograph Mode - Topcom 2000 Manual De Usuario

TOPCOM Outdoor Sportswatch 2000
8

CHRONOGRAPH MODE

The Watch includes a function to measure elapsed times, accumulative
elapsed time and lap times.
8.1 CHRONOGRAPH MODE
• In current time mode, press [M] twice to enter
Chronograph mode.
• To start the chronograph, press the [S/S] button
once.
• To stop the chronograph, press the [S/S] button once
again
• Repeat the above mentioned steps to get the
accumulative elapsed time of which the chronograph
is running.
• To reset the chronograph, hold the [L/R] button for 2 seconds.
8.2 LAP TIMES
The chronograph can measure elapsed time without stopping the counting
- lap time. (up to 100 laps)
• When the chronograph is counting, press the [L/R]
button once to record a lap time (this key operation
will not affect the counting).The lap number and lap
time will appear on the display for 10 seconds, and it
returns to the counting display automatically.
• Repeat the steps mentioned above to get another lap
time.
• To stop press the [S/S] button once again.
• To recall lap times, hold down the [M] button in the
Chronograph Stop Mode.
• When the Total Time (TTL) is displayed, press the
[S/S] or [L/R] button to check the next / previous lap
time.
• Hold down the [M] button any time to go back to the
Chronograph Display.
• To reset the lap times, hold the [L/R] button for 2 seconds in the
Chronograph Stop Display.
8
1e
Lap