Countdown Timer; Setting The Timer - Topcom 2000 Manual De Usuario

9

COUNTDOWN TIMER

The Timer counts down from the preset value to zero.

9.1 SETTING THE TIMER

There are 6 Quick-Preset-Values: 1, 3, 5, 10, 15 and 45 minutes and one
user defined time. The setting range is up to 99 hours 59 minutes 99
seconds.Once the User Preset Value has been set, such as 30 minutes,
that value is stored into the Watch for the user to recall next time.
• In current time mode, press [M] until TMR is
displayed.
• Press the [L/R] button to select a preset time or the
user defined time.
To set the user defined time.
• Hold the [M] button for 2 seconds. The flashing "SET"
icon will be displayed.
• Press the [M] button to switch between hour, minutes
and seconds.
• When the digits are flashing (selected), press the
[S/S] or [L/R] button to increase / decrease the
number (Hold down the button change the number at
a higher speed).
• When the setting is completed, hold the [M] button to
exit the setting display.
9.2 HOW TO USE THE TIMER.
• To start the timer, press the [S/S] button.
- In last 10 minutes, it will beep for every minute.
- In the last minute it will beep for every 10 seconds.
- in the last 5 seconds it will beep every second .
- As countdown time is reached, a beep sound which will last for 30
seconds.
• To stop the timer, press the [S/S] button once again .
• To reload the timer (existing preset counting time) for a new counting,
press the [L/R] button when the timer was stopped.
TOPCOM Outdoor Sportswatch 2000
SET
SET
9