Topcom 2000 Manual De Usuario página 6

TOPCOM Outdoor Sportswatch 2000
IMPORTANT
The symbols will be shown only in Current Time and Dual Time Mode
Since the weatherprediction is based on the changes in the air pres-
sure, it is highly recommended to stay at the same altitude for at least
24 hours for a higher accuracy predication.
The Watch predicts the weather by adopting general weather predic-
tion principles, it is NOT capable to reflect the dramatic changing of
weather within a very short period of time.
6.1 HOW TO SET CURRENT TIME
• Press and hold the [M] button for about 2 seconds in
the Current Time Mode. In setting display, the
flashing "SET" icon will appear.
• Press the [M] button to change the selection
following the adjacent Current Time Setting
Sequence.
1. Seconds
2. Minute
3. Hour
4. Year
5. Month
• When the second digits are flashing (selected), press the [S/S] or
[L/R] button to reset the digits to "00".
• When the digits are flashing (selected), press the [S/S] or [L/R]
button to increase / decrease the number.(Hold down the button to
change the number at a higher speed).
• When month-day order setting is selected, press the [S/S] or [L/R]
button to select between month-day and day-month format.
• When 12/24 hour format setting is being selected, press the [S/S]
button to select between 12 and 24 hour format.
• When LCD contrast is selected, press the [S/S] or [L/R] button to
increase / decrease the contrast level (1 to 10).
• When key beep setting is selected, press the [S/S] or [L/R] button to
select between ON and OFF the beep.
• Press and hold the [M] button to exit the setting display.
6
6. Day
7. Month/Day
8. 12/24h Format
9. LCD display contrast
10. Key Beep
SET
SET