Topcom 2000 Manual De Usuario página 12

TOPCOM Outdoor Sportswatch 2000
12.4 ALTIMETER CALIBRATION
To have an accurate reading, you have to calibrate your altimeter as much
as possible.
There are 4 kinds of calibration methods.
NOTE: The altitude is calibrated independently on each mode. For ex-
ample, if absolute altitude is selected, effect of the sea level pressure
previous setting will be ignored
12.4.1 ZERO ALTITUDE ADJUSTMENT
The Watch can measure the relative altitude, for example, it can measure
the ascending or the descending altitude between the starting point and the
finish point of a trail.To measure this, the current altitude must be set to
'zero' at a reference point such as the starting point of a trail. An 'r' indicator
will be appeared on the display.
• In current time mode, press the [SR] button
until the altitude "ALTI" is displayed.
• Hold the [M] button for 2 seconds. The
flashing "SET" icon and "ZERO" will be
displayed.
• Press the [S/S] button in Display, "NO" is
displayed.
• Press the [S/S] button to select "YES"
• Hold the [M] button for 2 seconds to
confirm the setting and to exit Adjustment
Display.
• "DONE" will be displayed and the watch
will be back in Altitude Mode. The altitude is
0 meter.
12
A LT I
A LT I
A LT I
A LT I
SET
A LT I
A LTI