Type 2: Manual Choke/Manual Throttle; Type 3: Flywheel Brake/Remote Choke/Fixed Throttle - Honda GCV160 Manual Del Propietário

00X39Z0LA240.book Page 4 Wednesday, March 4, 2009 8:05 AM
3. See equipment manual
and position the flywheel
brake control so the
flywheel brake lever is in
the RUN position.
4. Pull the starter grip lightly until
resistance is felt, then pull briskly.
NOTICE
Do not allow the starter grip to snap
back against the engine. Return it
gently to prevent damage to the
starter.
5. If the choke was used to start the
engine, move the choke/throttle
lever to the FAST (or high) position
as soon as the engine warms up
enough to run smoothly without
use of the choke.
Throttle Setting
Position the throttle control for the desired engine speed. For best
engine performance, it is recommended the engine be operated with
the throttle in the FAST (or high) position.
Stopping the Engine
1. Move the choke/throttle control to
the SLOW position.
2. Release the flywheel
brake lever to stop the
engine.
3. Turn the fuel valve to
the OFF position (see
TYPE 1 Step 1 on
page 3).
4
FLYWHEEL
BRAKE LEVER
STARTER
GRIP
FAST
CHOKE
CHOKE/
THROTTLE
LEVER
SLOW
FAST
THROTTLE
LEVER
FLYWHEEL
BRAKE LEVER
ENGLISH

TYPE 2: MANUAL CHOKE/MANUAL THROTTLE

Starting the Engine
1. Turn the fuel valve to the ON position (see TYPE 1 on page 3).
2. Move the choke lever to the ON position (cold engine).
3. Move the throttle lever to the FAST position.
SLOW
STOP
FAST
FUEL
THROTTLE
VALVE
LEVER
ON
4. Pull the starter grip lightly until resistance is felt, then pull briskly
(see TYPE 1 step 4).
5. If the choke was used to start the engine, move the choke lever to
the OFF position as soon as the engine warms up enough to run
smoothly without use of the choke.
6. Position the throttle lever for the desired engine speed. For best
engine performance, it is recommended the engine be operated
with the throttle in the FAST (or high) position.
Stopping the Engine
1. Move the throttle lever to the SLOW position.
2. Move the throttle lever to the STOP position.
3. Turn the fuel valve to the OFF position (see TYPE 1 Step 1 on
page 3).
TYPE 3: FLYWHEEL BRAKE/REMOTE CHOKE/FIXED
THROTTLE
Starting the Engine
1. Turn the fuel valve to the
ON position (see TYPE 1
Step 1 on page 3).
CHOKE CONTROL
2. See the equipment
CABLE
manual and move the
choke control cable so
FUEL VALVE ON
that the choke arm
moves to the choke ON
position (cold engine).
3. Move the flywheel brake lever
to the RUN position.
4. Pull the starter grip lightly until
resistance is felt, then pull
briskly (see TYPE 1 step 4).
5. If the choke was used to start
the engine, move the choke
control cable so that the choke
arm moves to the OFF position
as soon as the engine warms
up enough to run smoothly
without use of the choke.
The engine speed is preset on this type.
Stopping the Engine
1. Release the flywheel brake lever to stop the engine.
2. Turn the fuel valve to the OFF position (see TYPE 1 Step 1 on
page 3).
CHOKE LEVER
OFF
ON
ON
OFF
CHOKE
ARM
FLYWHEEL BRAKE LEVER
STOP
RUN