Information On 'FIeld-Adjustable Trip Points' And 'ADvanced Grid Features; Fcc / Rss Compliance; Insulation Monitor/Interruption, Insulation Monitoring - Fronius Symo Advanced 10.0-3 208-240 Manual De Instrucciones

Proper use also means
-
-
-
When configuring the photovoltaic system, make sure that all components are operating
completely within their permitted operating range.
All measures recommended by the solar module manufacturer for maintaining solar mod-
ule properties must be followed.
Follow all grid operator regulations regarding grid power feed and connection methods.
Information on The inverter is equipped with 'Field adjustable trip points' and 'Advanced Grid Features'.
'Field-adjustable For further information, please contact 'Fronius Technical Support' at the following email
trip points' and address: pv-support-usa@fronius.com.
'Advanced Grid
Features'
FCC / RSS Com- FCC
pliance This device corresponds to the limit values for a digital device of class B in accordance with
Part 15 of the FCC regulations. The limit values should provide adequate protection
against harmful interference in homes. This device creates and uses high frequency ener-
gy and can interfere with radio communications when not used in accordance with the in-
structions. However, there is no guarantee against interference occurring in a particular
installation.
If this device interferes with radio or television reception when turning the device on and
off, it is recommended that the user solve this with one or more of the following measures:
-
-
-
-
Industry Canada RSS
The device corresponds to the license-free Industry Canada RSS standards. Operation is
subject to the following conditions:
(1) The device may not cause harmful interference
(2) The device must accept any interference received, including interference that may
cause undesired operation.
Insulation Moni- The inverter is equipped with the following safety features as required by UL 1741 and the
tor/Interruption, National Electrical Code:
Insulation Moni-
toring Insulation monitor (IMI/RCMU)
The IMI (isolation monitor interruptor) feature is performed by the RCMU (residual current
monitoring unit) feature in the inverter. This feature automatically monitors whether a leak-
age current exists in the grid power feed operation. The inverter is disconnected from the
grid if a defined leakage current is exceeded.
10
carefully reading and obeying the instructions and all the safety and danger notices in
the Operating and Installation Instructions
compliance with the maintenance operations
installation as specified in the Installation Instructions
adjust or reposition the receiving antenna
increase the distance between the device and the receiver
connect the device to another circuit, which does not include the receiver
for further support, please contact the retailer or an experienced radio/TV technician.