Risk Resulting From Electrical Current; Warnings - Pacojet Junior Manual De Instrucciones

3.2 Risk resulting from electrical current
• Before connecting the Pacojet Junior to the mains power supply,
make sure that the mains voltage / frequency specified on the type
plate is guaranteed. Only ever use the device with the AC current
specified on the type plate.
• For additional protection, we recommend installing a residual
current circuit breaker with 20 mA.
• If you detect any abnormalities (e.g., smoke, noises) during
operation, switch off the device straight away and disconnect it
from the mains (unplug the device).
• Only ever use the device when it is free from technical faults.
• Check the device and connecting cable for external damage before
each use. Never use the device, connecting cable, and accessories if
they are damaged.
• If you notice any damage to the device or its accessories during
operation, switch off the Pacojet Junior at the mains switch and
unplug the mains plug.
• Always have the device repaired by an official PACOJET service
partner. Never repair the device yourself.
• Never submerge the device in water. Do not expose the device to
high levels of moisture.
• Always unplug the power supply if the device is left unused for long
periods of time.
• When disconnecting the device from the mains, always take hold of
the plug itself and not the connecting cable.
• Never touch the connecting cable and mains plug with wet hands.
• Make sure that the connecting cable does not get twisted or trapped.
Keep it away from sharp edges.
3.3

Warnings

In addition to the general safety notes provided here, the user manual also contains other
instructions pertaining to specific processes. These warnings relate to the specific action being
described and refer to potential hazards during operation.
The following symbols and types of notice refer to various levels of risk and additional notes:
EN
9