Beta 1885/KF Manual Del Usuario página 17

OPERATION MANUAL AND INSTRUCTIONS ISTRUZIONI PER L'USO
USE
Preparation for use.
Connect the power supply cable to the mains (220V AC, single-phase) and turn on the station by pressing the master switch:
- Check that the valves are CLOSED.
- Check the oil levels.
- Empty the old oil tank, if necessary.
- Check the oil level in the automatic transmission.
- Place the car on a free-wheel lift and locate the input and output pipes on the oil cooling line of the gearbox.
- Open the transmission line in the most easily reachable point, being careful not to be connected to plastic fittings or the radiator
coupling, in order to avoid breaks.
- Place an oil collector directly under the point chosen for the opening of the transmission line, and let in the oil that will come out
of the pipe.
- Start the car, to determine from which pipe oil comes out, and thus check the transmission outlet.
- Then connect the return pipe of station 1885 to the transmission outlet as determined above, and the delivery pipe to the return
line.
- Start the car engine, and check the connections as well as the operating pressure gauge; the operating pressure must increase
from 1 to 4 bar.
1
8
9
7
6
5
EN I
2
4
3
17