Beta 1885/KF Manual Del Usuario página 21

OPERATION MANUAL AND INSTRUCTIONS ISTRUZIONI PER L'USO
STEP 4
- STEP 4, "Filling oil sump", will then start. The display will immediately show the amount of oil equivalent to the amount of oil
discharged in the previous step.
Make sure to use an oil that complies with the manufacturer's specifications.
- Press the key to increase the amount, if necessary, according to any oil residues found in the sump during removal.
Pressing the key will cause the station to start filling the sump, and the display will show the amount of oil that is being
poured in.
- After fresh oil has been injected into the sump, the station will emit a few beeps, and the display will show the amount needed
to replace oil in the converter.
STEP 5
- The value provided by the station was calculated on the basis of the total amount of oil set by the user in the startup screen
and that injected into the sump in the previous step (step 4) (it can be increased or decreased by pressing
press the key. The station will require the user to start the car with the gearshift in the parking ("P") or neutral ("N")
position, the message being shown on the display.
- After the car has been started, keeping the gearshift in "P" or "N" position, QUICKLY press the
automatically start injecting fresh oil, removing the same amount of old oil from the converter. The display will show both the
amount of injected fresh oil and the amount of removed old oil.
When the oil displayed in the old oil sight glass has a colour similar to that of the oil displayed in the fresh oil
sight glass, switch off the car.
- After the oil in the converter has been changed, the station will stop, automatically selecting the following:
EN I
). Then
key. The station will
21