1.3
Intended use
The pump is exclusively designed for:
Use with clean water at temperatures between +7°C and +60°C for non-food
–
purposes.
Use with chemical products such as fertilizers, weed killers, fungicides, etc., in a
–
watery solution and always compatible with the materials the pump is made.
(Remember that the diaphragms are normally made of BUNA – N and, on request,
in DESMOPAN, VITON or HPS®, while the O-Rings are normally in NBR).
The pump cannot be used with:
Watery solutions whose viscosity and density exceed those of water.
–
Chemical solutions for which compatibility with the materials the pump is made is
–
not known.
Sea water or water with a high concentration of salt
–
Fuels and lubricants of all kinds and types
–
Inflammable liquids or liquefied gases
–
Food-grade liquids
–
Solvents and diluents of all kinds and types
–
Paints of all kinds and types
–
Liquids at temperatures lower than 7°C or higher than 60°C
–
Liquids containing granules or solids in suspension
–
The pump must not be used for washing: persons, animals, electrical equipment, delicate
objects, the pump itself or the system in which it is installed.
The pump must not be used in places where there are particular conditions, such as
corrosive or explosive atmospheres, for example.
All other use is considered improper.
Idromeccanica Bertolini shall not be liable for any damage deriving from improper or
incorrect use.
55