Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
FEATURES
A) Slide Out Glass Shelves
(Number and type of shelves depends on the
model.) Shelf can be arranged on any rails inside
the appliance. It is protected against being pulled
out accidentally. If you want to remove a shelf,
slightly lift up the front part and pull it out.
Perishable foods should be stored towards the
back/rear of the shelves.
B) Door Liner
The door liner consists of various shelves or holders
used for storing eggs, cheese, butter and yogurt as
well as other smaller packages, tubes, cans etc. The
lower shelf is used for storing large bottles.
C) Defrost Water Outlet
The interior of the refrigerator is cooled with a cool-
ing plate mounted in the rear wall. Under the plate
there is a channel and an outlet for defrost water.
Regularly check the defrost water outlet and the
drain channel for blockage. They should always be
kept free and clear of food particles. If the drain
outlet does become clogged, use a plastic straw to
unclog it.
CHANGING THE DIRECTION OF
THE DOOR SWING
If you find the direction of opening the door on your appliance inconvenient, you can change it. Holes on the
opposite side have already been prepared in the factory. See figure below for a guide to the components that
must be removed and switched to the other side.
INSTALLATION INSTRUCTIONS
6
Publicidad
Tabla de contenido
