Frigomat Titan Serie Manual De Uso página 37

FRIGOMAT s.r.l. declines any liability for damages to persons and/or things due to a
wrong installation and/or the non-compliance with the industrial accident prevention
standards. Never touch the machine with hands, both when it is on duty and during
cleaning and maintenance operations, without making sure that the machine has been
stopped by means of pushbutton STOP and the master switch has been turned off. Never
clean the machine by means of high pressure jets of water. Never close the cut-off cock
while the machine is running. Pay attention not to damage the feeder. In case of necessity,
make it be replaced.
In case the machine provided with water-cooling is left at a room temperature inferior to
0°C, it is necessary to run off all water present inside the condenser before starting up the
machine.
9 - ENGLISH
• Press STOP pushbutton to stop the machine.
Do not let the machine run empty for a long
time.
• When the machine is in STOP position, unlock
the door by lifting the lever and then turn it
towards the left.
• Remove the agitator, check and lubricate the
agitator stuffing box with FRIGOMAT lubricant
(provided as standard).
• e ideal temperature shall range between 15°C
and 35°C.
• The ideal humidity shall range between 30 and
60%.