OHAUS YS Serie Manual De Instrucciones página 7

YS Series Balances EN-5
The symbol for each unit is displayed next to the setting (g = grams, oz = ounces,
ozt = troy ounces, dwt = pennyweights, lb = pounds, t = taels, ct = carat, PC =
pieces).
When t is set to On, select the type of taels (tael1 = Hong Kong, tael2 = Singapore
or tael3 = Taiwan).
STABILITY RANGE [StAb]
Set the stability range.
.5 d = the unit symbol will light when the display is stable within 0.5 divisions
1 d = the unit symbol will light when the display is stable within 1 division
2 d = the unit symbol will light when the display is stable within 2 divisions
5 d = the unit symbol will light when the display is stable within 5 divisions
AUTO ZERO TRACKING RANGE [AUto0]
Set the automatic zero tracking range.
.5 d = the display will maintain zero until a drift of 0.5 divisions per second has
been exceeded
1 d = the display will maintain zero until a drift of 1 division per second has been
exceeded
3 d = the display will maintain zero until a drift of 3 divisions per second has been
exceeded
Off = disabled
PARTS COUNTING ERROR LEVEL [PCErr]
Set the parts counting error level.
Off = PCErr message is disabled
1 PCt = PCErr is displayed if the count accuracy exceeds 1 percent
2.5PCt = PCErr is displayed if the count accuracy exceeds 2.5 percent
5 PCt = PCErr is displayed if the count accuracy exceeds 5 percent
AUTO OFF
[A. OFF]
Set the automatic shut off timer.
OFF = disabled
60 = the scale turns off after 60 seconds of inactivity
120 = the scale turns off after 120 seconds of inactivity
180 = the scale turns off after 180 seconds of inactivity
END [End]
Press Yes to exit the Setup menu or No to return to the top of the Setup menu.