Standard Accessories; Optional Accessories Supplied On Request; General Conditions Of Use - Corghi ProLine 640 Manual De Uso

STANDARD
ACCESSORIES
The following parts are supplied together
with the machine.
- Calliper for wheel width measurement
- 10 mm hex wrench
- 100 g weight
- Power cable
OPTIONAL
ACCESSORIES
SUPPLIED ON
REQUEST
Please refer to the relevant accessories
catalogue.
GENERAL
CONDITIONS OF
USE
The equipment is intended for profes-
sional use only.
WARNING
Only one operator may work on the equip-
ment at a time.
The wheel balancers described in this
manual must be used exclusively to meas-
ure the extent and position of car wheel
unbalances, within the limits specified in
the Technical specification section. Fur-
thermore, models equipped with motors
must be provided with a suitable guard,
fitted with a safety device, which must be
lowered during the spin operation.
WARNING
Any use other than those described in this
manual is to be considered improper and
unreasonable.
User manual ProLine 640
WARNING
Do not start the machine without the
wheel locking equipment.
WARNING
Do not use the machine without the guard
and do not tamper with the safety device.
WARNING
Do not clean or wash the wheels mounted
on the machine with compressed air or
jets of water.
WARNING
When working, never use equipment not
manufactured by the manufacturer.
WARNING
Get to know your machine: your familiarity
with its exact operation is the best guar-
antee of safety and performance.
Learn the function and location of all
commands.
Carefully check that all controls on the
machine are working properly.
To prevent accidents and personal injury,
all the equipment must be correctly in-
stalled, correctly operated and correctly
serviced.
UK
47