Manual Wheel Parameter Entry; Manual Sensor) - Corghi ProLine 640 Manual De Uso

urement.
If an incorrect value has been acquired
during the measurement phase, move the
arm to the rest position and then repeat
the operation.
- Measure the width of the rim using the
calliper provided (Fig. 11).
- Modify the width value displayed by
pressing the keys
the desired number is set.
The WIDTH can be set in millimetres or
the values already set can be converted
from inches to millimetres by pressing
the button.
Keep the
to rapidly increase or decrease the previ-
ously set values.
User manual ProLine 640
In the event of failure of the automatic
measuring system and in the version with
internal manual sensor, the geometrical
data can be entered using the keypad:
- Press the
- Measure the width of the rim using the
calliper provided (Fig. 11).
- Modify the width value displayed by
11
pressing the keys
the desired number is set. The width can
be set in millimetres or the values already
set can be converted from inches to milli-
until
metres by pressing the
- Values set previously can be increased or
decreased quickly by keeping the keys
- Press the
keys pressed
previous value and set the machine for
diameter data entry.
- Read the rated rim diameter value on
the tyre.
- Modify the displayed diameter value by
pressing the
the read number is set. Press the button
to set the diameter in millimetres or to
convert a parameter already entered in
inches into millimetres
MANUAL WHEEL
PARAMETER
ENTRY (VERSION
WITH MANUAL
SENSOR)
button.
pressed.
button to confirm the
until
button.
UK
buttons until
.
49