Headlight; Replacing The Headlight Bulb; Taillight - SHERCO 50 SE Manual De Propietario

2
1

HEADLIGHT

Always keep the headlight glass clean (see
p.88).
☛
Regularly check the headlig ht beam for the
proper direction.

REPLACING THE HEADLIGHT BULB

Remove the headlight plate and headlamp.
Remove the rubber protector
Turn the socket a quarter turn
counterclockwise to extract it from the holder.
Press lightly on the bulb while turning
counterclockwise and extract it from t
he socket .
2
Install the new bulb. Headlight bulb S2:
12V 35 / 35W
Install the socket with the bulb back into the
holder in a clockwise direction.
Reinstall the rubber protector

TAILLIGHT

Always keep the taillight glass clean (see
p.88).
The rear taillight group is a sealed LED unit.
In the case of burning out of one or several
of the LED's it is necessary to replace the
whole unit.
For a replacement, contact a SHERCO
authorized service center.
.
1
.
1
☛
87