Bobbinwinding - Sears Kenmore 385.16231 Manual De Instrucciones

° Bobbinwinding
[] Put! t hehandwheel outtotheright.
[] Draw thethread fromthespool.
[_ Guide thethread around thethreadguide_
® Forthehorizontal spool p in
(_ Fortheadditional spool p in
[_Threadthrough theho_e inthebobbin fromtheinside to
theoutside.
[] Putthebobbin onthebobbin winder s pindle.
[] Push thebobbin totheright
[_ Withthefreeendofthethreadheldinyourhand,depress
thefootcontrol, S topthemachine when it hasmade a
fewturns,andthencutthethread closetotheholeinthe
bobbin..
[] Depress thefootcontrol againWhen thebobbin isfully
wound, i tstopsautomatically. Return thebobbin winder
to itsoriginal p osition by moving thespindle totheleft,
andcutthethread asshown.
[] Pushthehandwheel in._ Themachine willnotsewuntil
theclutchisengaged
NOTE:
Theposition ofthebobbin winderstopper
i s adjustable
depending on the required amount of thread on the
bobbin (example: 1/2 full or full) Using a screwdriver,
loosen the screw one turn or less, so that you can adjust
the position of the bobbin winder stopper.. Do not take the
screw all the way out. Retighten the screw to fix the
stopper at the desired position
[]
[]
f
®
(,:{_ J./i
[]
f
®
[]
J
[]@
f
[]
J
-._ j
24